Fence For Solar Energy Station Solar Panel Mounting Accessories
The fence facilities of the photovoltaic power station play a vital
role in the protection field. As one of the safety facilities, the
photovoltaic fence can effectively protect the photovoltaic
equipment, isolate the equipment safety area and peripheral
protection.
The fence of the photovoltaic power station is generally composed
of carbon steel wire welding, connecting clips and rain caps. The
surface treatment can be plastic dipping, plastic spraying and
galvanizing. There are various colors of the fence of the
photovoltaic power station, which can be roughly divided into
green, white, blue or black, with the characteristics of long-term
corrosion resistance and UV resistance.
According to the content of the new protection standard for
photovoltaic power stations in China, the height of the fence in
the photovoltaic field shall not be less than 1.8m. The newly
built, reconstructed and expanded photovoltaic plant shall be
provided with a center and connected with the alarm system of the
power station. However, in actual operation, the fence of the
photovoltaic power station is generally about 2m, the wire diameter
of the mesh is not less than 5mm after plastic planting, the mesh
diameter is not more than 75x150mm, the diameter of the column can
be 60 * 1.8mm, the spacing is generally 3m, and the foundation is
concrete structure or ground pile. All screws are automatic
anti-theft bolts, of course, the accessories can also be designed
according to the specific requirements of customers.
As a PV enterprise, Lipu Metal has been focusing on the R&D,
production and sales of solar mounting system and PV frames. Due to
Lipu Metal has a professional design and development team, so it
has obtained nearly 17 domestic and foreign product patents so far.
Professional production and QC team, which is strictly controlling
the quality from raw materials to finished products accordance with
the ISO9001 international quality system standards.
Lipu Metal can not only produce conventional PV mounting system
products and accessories, but also can offer the design which will
meet the customized needs. According to the situation of different
projects, Lipu Metal will provide matched mounting system
solutions. From the beginning of purchasing from Lipu Metal,
customers can enjoy a series of supporting services, including
field investigation, measurement & calculation, design,
installation support and after-sales service.
Project Photo Reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
