Solar Panel Frame Aluminum Profile Aluminum Solar Panel Border
LP031
The frame on the photovoltaic panel is generally called solar
frame, and the material of the solar frame is mostly aluminum
alloy, for the following reasons:
1. Aluminum alloy profiles are extruded profiles, which can make
complex sections and facilitate the installation of corner codes,
which is difficult for stainless steel materials;
2. The aluminum alloy has low density and light weight, but its
hardness and tensile strength can meet the requirements of bearing
the battery panel. The steel is relatively heavy, and the weight of
photovoltaic glass is already heavy. If the solar frame is also
heavy, it will greatly increase the cost of handling and
installation.
3. Aluminum alloy is corrosion-resistant. Aluminum alloy itself is
a corrosion-resistant metal. In addition, the surface of solar
frame will be anodized, which can effectively block the contact
between air and aluminum alloy matrix and reduce the risk of
oxidation. The service life of solar aluminum frame can reach more
than 25 years. Although some high-strength plastics are also very
light, their oxidation resistance is poor and their service life is
not guaranteed.
Since establishment, Lipu Metal has always had a production line
dedicated to the R&D and production of photovoltaic frames. At
present, it supplies not only Lipu Energy, but also other Tier 1
panel factories. If you have any need for photovoltaic frame,
please contact us for negotiation.
Technical Data
Product Name | Solar Panel Frame |
| Application | All kinds of panels |
Material | Aluminum |
Surface | Anodizing
Electrophoresis
Powder coating, polishing, sand blasting, etc |
Standard | GB/T5237-2004,Q / 320281PDW01-2008 |
Dimensions | Customized |
| OEM | YES |
Warranty | 10 Years |
| Work life | 25 Years |
About shipping
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
