Steel Ground Mounting System Solar Power Station Solar Photovoltaic
System
The advancement of solar power generation technology has
accelerated the development of solar photovoltaic supports. Now, in
solar power stations and household solar energy, solar photovoltaic
supports can be seen everywhere. The steel structural used in the
solar photovoltaic support mainly refers to round steel, small
angle steel and thin-walled steel.
The advantages of steel solar photovoltaic support are that it can
be made into thin-walled steel with different cross-sectional forms
and sizes after cold bending or cold rolling. Moreover, compared
with hot-rolled section steel, under the same cross-sectional area,
the turning radius of thin-walled section steel can be increased by
50-60%, the cross-sectional moment of inertia and resistance moment
can be increased by 0.5-3 times, and the strength of the material
can be reasonably utilized.
The disadvantages of the steel solar photovoltaic support are: the
steel section of the solar support is small, the tools are
difficult to operate, and the construction is difficult. At
present, most solar support panels cannot be directly connected and
installed with thin-walled steel, and other auxiliary fixing
structures are required.
In addition, with regard to the corrosion resistance of the solar
photovoltaic support, the solar photovoltaic support can be hot
galvanized only after the processing workers drill the holes.
As a PV enterprise, Lipu Metal has been focusing on the R&D,
production and sales of solar mounting system and PV frames. Due to
Lipu Metal has a professional design and development team, so it
has obtained nearly 17 domestic and foreign product patents so far.
Professional production and QC team, which is strictly controlling
the quality from raw materials to finished products accordance with
the ISO9001 international quality system standards.
Lipu Metal can not only produce conventional PV mounting system
products and accessories, but also can offer the design which will
meet the customized needs. According to the situation of different
projects, Lipu Metal will provide matched mounting system
solutions. From the beginning of purchasing from Lipu Metal,
customers can enjoy a series of supporting services, including
field investigation, measurement & calculation, design,
installation support and after-sales service.
Technical Data
Product Name | Steel Ground Mounting system |
| Application | Flat land or flat roof |
Material | Galvanized steel and A2-70 hardware |
Wind Load | 88 M/S |
Snow Load | 2.0 KN/M² |
Applicable Module | Framed or Frameless |
Module Orientation | Portrait or Landscape |
Standard | JISC8955:2017, GB50009-2012, GB50797-2012 |
Dimensions | Customized |
Warranty | 10 Years |
| Work life | 25 Years |
Project photo referencce
