Aluminum Solar Carport Structure Solar Parking Lot Solar
Photovoltaic System
Photovoltaic shed, as the name implies, is a combination of
photovoltaic and shed roof, which is the simplest combination of
photovoltaic and architecture. It can not only realize all the
functions of the traditional shed, but also bring benefits to the
owners. For the sake of beauty and anti-corrosion effect, sometimes
customers will choose aluminum structural supports, especially for
household type sheds.
Most of the photovoltaic sheds with aluminum profile structure are
multi column structures. However, if the covering area does not
need to be particularly large, a single column structure can also
be designed. The distance between the lowest point of the inclined
aluminum profile structure shed and the ground is more than 2.5
meters, and the installation angle is 5 degrees or 10 degrees.
The main advantages of aluminum profile structure photovoltaic shed
are:
(1) Beautiful appearance and good anti-corrosion effect;
(2) No on-site welding and drilling;
(3) Large lifting equipment is not required for construction, which
is easy to install;
But its main disadvantages are:
(1) The car shed is of all aluminum structure, and the aluminum
profile of the car shed needs to be customized, with high cost;
(2) It is generally double column or n-type, W-type, and the door
opening spacing is relatively limited after parking;
(3) The height and span of the shed are limited by the strength and
length of the material, so there is no way to make a particularly
large structure.
Technical Data
Product Name | Aluminum Solar Carport Structure |
| Application | Flat land |
Material | AL6005-T5 and A2-70 hardware |
Wind Load | 60 M/S |
Snow Load | 1.5 KN/M² |
Applicable Module | Framed or Frameless |
Module Orientation | Portrait or Landscape |
Standard | JISC8955:2017, GB50009-2012, GB50797-2012 |
Dimensions | Customized |
Warranty | 10 Years |
| Work life | 25 Years |
Project Photo Reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton
Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the
factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for
aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
 |  |  |  |  |
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
 |  |  |  |  |
